Konica Minolta Magicolor 2480 MF User Manual (English)

Other manuals for Konica Minolta Magicolor 2480 MF

User Guide182 pages

Manual13 pages

Technical Guide46 pages

Quick Guide3 pages

Install Guide30 pages

Questions and Answers:

T
torresmariaJul 28, 2025
What to do if media is misfeeding in my Konica Minolta All in One Printer?
- A
  Austin LyonsJul 29, 2025
  If the Konica Minolta All in One Printer media is not correctly positioned in the tray, remove the misfed media and reposition the media properly. If the number of sheets exceeds the maximum allowed, remove the excess media and reload the correct number of sheets. Ensure the media guides are correctly adjusted to the media size. Remove warped or wrinkled media; smooth it out, and reload it, or do not use it. Replace moist media with new, dry media. Special media must be loaded in Tray 1 only. Load transparencies or label sheets according to the manufacturer’s instructions.
D
Dawn PatelAug 1, 2025
Why are there toner smudges on the back of pages from my Konica Minolta All in One Printer?
- P
  parkeranthonyAug 2, 2025
  If you notice toner smudges on the back side of the page from your Konica Minolta All in One Printer, try these solutions: Clean the media transfer roller. Print several blank sheets to remove excess toner. Inspect the toner cartridges and drum cartridge for any damage and replace them if needed.
R
Roger FloresAug 6, 2025
Why does the duplex option misfeed on my Konica Minolta Magicolor 2480 MF?
- F
  frankmoyerAug 6, 2025
  To resolve misfeeds with the duplex option on your Konica Minolta All in One Printer, use KONICA MINOLTA-approved media and ensure you have not mixed media types in Tray 1. Avoid using unsupported media such as envelopes, labels, letterhead, postcards, card stock, coated paper, or transparencies.
J
jameswilliamsAug 10, 2025
What to do if media misfeed message stays on Konica Minolta Magicolor 2480 MF All in One Printer?
- L
  Larry SmithAug 10, 2025
  If the media misfeed message persists on your Konica Minolta All in One Printer, try opening and closing the engine cover again. Also, recheck the media path and ensure all misfed media has been removed.
K
Kenneth HolmesAug 15, 2025
Why are colors not registering properly on my Konica Minolta All in One Printer?
- M
  mortonchristineAug 15, 2025
  If the colors are not registering properly on your Konica Minolta All in One Printer, ensure that the engine cover is closed. Remove and reinstall the drum cartridge. Replace any moist media with new, dry media.
D
Dr. Sandra SchwartzAug 19, 2025
How to fix toner smudges or residual images on Konica Minolta All in One Printer?
- K
  Keith WatsonAug 19, 2025
  If you're seeing toner smudges or residual images from your Konica Minolta All in One Printer, check the toner cartridges for damage and replace if necessary. Also, return the fuser separator levers to the plain paper setting if they are adjusted for envelope printing.
J
jamie87Aug 23, 2025
Why are several sheets going through my Konica Minolta Magicolor 2480 MF All in One Printer at once?
- A
  Anthony HarrisAug 23, 2025
  If several sheets go through the Konica Minolta All in One Printer together, even up the front edges of the media and reload it. Replace moist media with new, dry media. Do not fan transparencies.

Konica Minolta Magicolor 2480 MF Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	2400 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Technology	Laser
Scan Type	Flatbed
Connectivity	USB 2.0
Operating System Compatibility	Mac