Konica Minolta magicolor 7450 II

Other manuals for Konica Minolta magicolor 7450 II

Specifications2 pages

Reference Guide350 pages

Installation Guide12 pages

Brochure & Specs4 pages

Safety Information Guide48 pages

Questions and Answers

S
Susan ReedNov 21, 2025
Why is my Konica Minolta magicolor 7450 II Printer misfeeding media?
- P
  Philip GriffithNov 21, 2025
  Media misfeeding in your Konica Minolta printer can occur for several reasons: * The media is not correctly positioned in the tray, you should remove the misfed media and reposition the media properly in the tray. * The number of sheets in the tray exceeds the maximum allowed, you should remove the excess media and reload the correct number of sheets in the tray. * The media guides are not correctly adjusted to the media size, you should adjust the media guides in the tray to match the size of the media. * Warped or wrinkled media is loaded in the tray, you should remove the media, smooth it out, and reload it. If it still misfeeds, do not use that media. * The media is moist from humidity, you should remove the moist media and replace it with new, dry media. * Custom-sized me...
K
Kathy SmallAug 25, 2025
What to do if pages are not correctly collated or the print job is cancelled from Acrobat Reader on Konica Minolta Printer?
- C
  Craig FloresAug 26, 2025
  If a printing error occurs with Acrobat Reader, print using the Preview application provided by the operating system.
J
Jamie BrownAug 26, 2025
What to do if media is misfeeding in my Konica Minolta Printer?
- R
  Rachael MoyerAug 27, 2025
  To address media misfeeding in your Konica Minolta Printer: * Ensure the media is correctly positioned in the tray. * Reduce the number of sheets to the maximum allowed. * Adjust the media guides to match the media size. * Remove warped or wrinkled media. * Replace moist media with dry media. * Use Tray 1 or 2 for special media. * Load transparencies or label sheets according to the manufacturer’s instructions. * Ensure envelopes are loaded with flaps facing up in Tray 1.
T
trandeborahAug 27, 2025
How to prevent several sheets going through Konica Minolta magicolor 7450 II together?
- A
  Ashley KlineAug 27, 2025
  If several sheets go through your Konica Minolta Printer together, it might be because the front edges of the media are not even, the media is moist, or there's too much static electricity. Remove the media, even the front edges, and reload it. If the media is moist, replace it with dry media. Avoid fanning transparencies to reduce static electricity.
T
Todd SullivanAug 28, 2025
What to do if media misfeed message stays on Konica Minolta magicolor 7450 II Printer?
- G
  gbennettAug 29, 2025
  If the media misfeed message persists on your Konica Minolta Printer, try opening and closing the right side cover again to reset the printer. Also, recheck the media path and ensure all misfed media has been removed.
A
Amy ArnoldSep 18, 2025
Why Konica Minolta Printer pages are not centered when printing 2 pages per sheet?
- C
  Christopher HowellSep 18, 2025
  When printing two pages on a single sheet of paper with paper sizes like Legal, Letter Plus, Foolscap, Government Legal, Statement, or Folio, the pages may not be centered, depending on the operating system.
M
michelle74Sep 14, 2025
Why Konica Minolta magicolor 7450 II Printer says specified name cannot be used for custom paper size?
- J
  John DouglasSep 15, 2025
  Due to limitations of Mac OS X, specify a different name for the custom paper size. Avoid using “Custom” or general paper size names specified in the PPD files, such as “A4” and “B4”.
J
Jason RussoSep 16, 2025
Why Konica Minolta magicolor 7450 II custom paper size is different from the size that was set?
- D
  Dorothy HerreraSep 16, 2025
  Custom paper size settings may slightly change depending on the operating system (for example, 5.80" may change to 5.79).
J
Jennifer BrennanSep 7, 2025
What to do if the specified name cannot be used for a custom paper size on Konica Minolta magicolor 7450 II?
- D
  Daniel NelsonSep 7, 2025
  Due to the limitations of Mac OS X, specify a different name. Avoid using “Custom” or general paper size names specified in the PPD files, such as “A4” and “B4”.
J
Jonathan RichSep 4, 2025
How to fix static electricity on transparencies in Konica Minolta magicolor 7450 II?
- M
  melissamitchellSep 4, 2025
  Remove the transparencies and load them in the tray one sheet at a time. Do not fan transparencies before loading them.

Summary

Introduction

Getting Acquainted with Your Printer

Learn about the printer's physical components and layout for proper operation.

About the Software

Details on printer drivers, utilities, and software required for printer operation.

About the Software

Printer Driver CD;DVD

Information on PostScript and PCL drivers for software installation.

PPD Files

Explanation of PPD files for printer driver installation on various platforms.

Utilities and Documentation CD;DVD

Details on utilities for printer management and setup.

System Requirements

Lists hardware and OS requirements for printer software and features.

Selecting Driver Options;Defaults (for Windows)

Guide to verifying and changing default printer driver settings.

Uninstalling the Windows Printer Driver

Step-by-step instructions for removing the printer driver from Windows.

Displaying Windows Printer Driver Settings

Instructions on accessing and viewing detailed Windows printer driver settings.

Printer Driver Settings

Explanation of common buttons and tabs within the driver interface for customization.

Limitations on Printer Driver Functions Installed with Point and Print

Details on limitations when using Point and Print with specific server/client combinations.

Using the Status Monitor (Windows Only)

Working with the Status Monitor

Instructions on using the Status Monitor to check printer status, consumables, and errors.

Printer Control Panel and Configuration Menu

About the Control Panel

Explanation of the printer's control panel, indicators, and keys for operation.

Message Window

Details on printer message window information and its meaning.

Configuration Menu Overview

Overview of the printer's configuration menu structure and accessible settings.

Camera Direct

Information on connecting digital cameras for direct printing via PictBridge.

Printing Directly from a Digital Camera

Steps to specify settings and initiate direct printing from a digital camera.

Using Media

Media Specifications

Lists supported media types, sizes, and feed directions for optimal printing.

Media Types

Details on various media types and their usage guidelines.

What Is the Guaranteed Imageable (Printable) Area?

Explains printable area limits on media sizes for clear prints.

Loading Media

Step-by-step instructions for loading various media types into printer trays.

Duplexing

Guide to two-sided printing, including paper selection and binding settings.

Output Tray

Information on the printer's output tray capacity and printed media handling.

Media Storage

Recommendations for storing printing media to maintain quality and prevent issues.

Replacing Consumables

About Toner Cartridges

Information about toner cartridges, handling, and replacement.

Replacing a Toner Cartridge

Step-by-step guide for safely removing and installing toner cartridges.

Replacing a Imaging Unit

Instructions for replacing the imaging unit to maintain print quality.

Replacing the Waste Toner Bottle

Procedure for replacing the waste toner bottle to prevent printer stoppage.

Replacing the Backup Battery

Guide for replacing the printer's backup battery to retain date and time.

Maintaining the Printer

Cleaning the Printer

Instructions on how to clean the printer's exterior, interior, and components.

Media Rollers

Guidance on cleaning media rollers to prevent paper feeding issues.

Troubleshooting

Printing a Configuration Page

Steps to print a configuration page to verify printer function and settings.

Preventing Media Misfeeds

Tips and precautions to avoid paper jams and ensure correct media handling.

Understanding the Media Path

Diagram and explanation of the media path to help locate paper jams.

Clearing Media Misfeeds

Instructions on how to gently remove misfed media to prevent jams and damage.

Solving Problems with Media Misfeeds

Table of common media misfeed symptoms, causes, and solutions.

Solving Other Problems

Troubleshooting guide for common printer issues like power, data, and control panel errors.

Solving Problems with Printing Quality

Guide to diagnosing and resolving print quality, density, and color issues.

Status, Error, and Service Messages

Explanation of printer messages to help diagnose and resolve issues.

Installing Accessories

Introduction

Information about available printer accessories and general installation notes.

Antistatic Protection

Precautions to protect printer components from electrostatic discharge during installation.

Dual In-Line Memory Module (DIMM)

Instructions for installing DIMM memory modules to expand printer capabilities.

Hard Disk Kit

Guide for installing a hard disk kit for font and overlay storage.

CompactFlash

Instructions for installing a CompactFlash card for resource storage and direct printing.

Duplex Option

Steps for installing the duplex option for automatic two-sided printing.

Lower Feeder Unit

Guide for installing optional lower feeder units to increase paper capacity.

Caster Base

Instructions for assembling and installing the caster base for printer mobility.

Banner Tray

Steps for installing the banner tray to accommodate long paper prints.

Technical Specifications

Printer

Detailed technical specifications for the printer's hardware, performance, and capabilities.

Consumable Life Expectancy Chart

Table indicating the expected page yield for various printer consumables.

Summary

Introduction

Getting Acquainted with Your Printer

Learn about the printer's physical components and layout for proper operation.

About the Software

Details on printer drivers, utilities, and software required for printer operation.

About the Software

Printer Driver CD;DVD

Information on PostScript and PCL drivers for software installation.

PPD Files

Explanation of PPD files for printer driver installation on various platforms.

Utilities and Documentation CD;DVD

Details on utilities for printer management and setup.

System Requirements

Lists hardware and OS requirements for printer software and features.

Selecting Driver Options;Defaults (for Windows)

Guide to verifying and changing default printer driver settings.

Uninstalling the Windows Printer Driver

Step-by-step instructions for removing the printer driver from Windows.

Displaying Windows Printer Driver Settings

Instructions on accessing and viewing detailed Windows printer driver settings.

Printer Driver Settings

Explanation of common buttons and tabs within the driver interface for customization.

Limitations on Printer Driver Functions Installed with Point and Print

Details on limitations when using Point and Print with specific server/client combinations.

Using the Status Monitor (Windows Only)

Working with the Status Monitor

Instructions on using the Status Monitor to check printer status, consumables, and errors.

Printer Control Panel and Configuration Menu

About the Control Panel

Explanation of the printer's control panel, indicators, and keys for operation.

Message Window

Details on printer message window information and its meaning.

Configuration Menu Overview

Overview of the printer's configuration menu structure and accessible settings.

Camera Direct

Information on connecting digital cameras for direct printing via PictBridge.

Printing Directly from a Digital Camera

Steps to specify settings and initiate direct printing from a digital camera.

Using Media

Media Specifications

Lists supported media types, sizes, and feed directions for optimal printing.

Media Types

Details on various media types and their usage guidelines.

What Is the Guaranteed Imageable (Printable) Area?

Explains printable area limits on media sizes for clear prints.

Loading Media

Step-by-step instructions for loading various media types into printer trays.

Duplexing

Guide to two-sided printing, including paper selection and binding settings.

Output Tray

Information on the printer's output tray capacity and printed media handling.

Media Storage

Recommendations for storing printing media to maintain quality and prevent issues.

Replacing Consumables

About Toner Cartridges

Information about toner cartridges, handling, and replacement.

Replacing a Toner Cartridge

Step-by-step guide for safely removing and installing toner cartridges.

Replacing a Imaging Unit

Instructions for replacing the imaging unit to maintain print quality.

Replacing the Waste Toner Bottle

Procedure for replacing the waste toner bottle to prevent printer stoppage.

Replacing the Backup Battery

Guide for replacing the printer's backup battery to retain date and time.

Maintaining the Printer

Cleaning the Printer

Instructions on how to clean the printer's exterior, interior, and components.

Media Rollers

Guidance on cleaning media rollers to prevent paper feeding issues.

Troubleshooting

Printing a Configuration Page

Steps to print a configuration page to verify printer function and settings.

Preventing Media Misfeeds

Tips and precautions to avoid paper jams and ensure correct media handling.

Understanding the Media Path

Diagram and explanation of the media path to help locate paper jams.

Clearing Media Misfeeds

Instructions on how to gently remove misfed media to prevent jams and damage.

Solving Problems with Media Misfeeds

Table of common media misfeed symptoms, causes, and solutions.

Solving Other Problems

Troubleshooting guide for common printer issues like power, data, and control panel errors.

Solving Problems with Printing Quality

Guide to diagnosing and resolving print quality, density, and color issues.

Status, Error, and Service Messages

Explanation of printer messages to help diagnose and resolve issues.

Installing Accessories

Introduction

Information about available printer accessories and general installation notes.

Antistatic Protection

Precautions to protect printer components from electrostatic discharge during installation.

Dual In-Line Memory Module (DIMM)

Instructions for installing DIMM memory modules to expand printer capabilities.

Hard Disk Kit

Guide for installing a hard disk kit for font and overlay storage.

CompactFlash

Instructions for installing a CompactFlash card for resource storage and direct printing.

Duplex Option

Steps for installing the duplex option for automatic two-sided printing.

Lower Feeder Unit

Guide for installing optional lower feeder units to increase paper capacity.

Caster Base

Instructions for assembling and installing the caster base for printer mobility.

Banner Tray

Steps for installing the banner tray to accommodate long paper prints.

Technical Specifications

Printer

Detailed technical specifications for the printer's hardware, performance, and capabilities.

Consumable Life Expectancy Chart

Table indicating the expected page yield for various printer consumables.

Konica Minolta magicolor 7450 II Specifications

General

Wi-Fi	-
Network ready	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	8.2 s
Time to first page (color, normal)	11.4 s
Print speed (black, normal quality, A4/US Letter)	24.5 ppm
Maximum duty cycle	120000 pages per month
Page description languages	PCL 6, PostScript 3
Memory type	DDR2
Maximum internal memory	1024 MB
Total input capacity	100 sheets
Total output capacity	350 sheets
Maximum input capacity	1850 sheets
Multi-Purpose tray input capacity	250 sheets
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5, B6
Borderless printing media sizes	Legal, Letter
Maximum ISO A-series paper size	A3
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet
Compatible operating systems	Windows XP, Vista, 7 Mac 9.1+ Linux
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	130 W
Power consumption (printing)	1450 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 35 °C