Why is my Konica Minolta Printer power not on?
If your Konica Minolta Printer is not turning on, check the following: Ensure the power cord is correctly plugged into the outlet. Try plugging another electrical appliance into the outlet to verify it's working. Make sure the power switch is in the 'on' (I) position. Verify that the printer is connected to a power source that matches the printer's specifications.
What to do if data was sent to my Konica Minolta Magicolor 4650DN Printer, but it doesn’t print?
If data was sent to the Konica Minolta Printer, but it doesn’t print, handle according to the message displayed in the message window. Also, if user authentication or account track settings are specified, click the User Authentication/Account Track button in the printer driver, and then type in the necessary information before printing.
Why does the color have a poor reproduction or has poor color density on my Konica Minolta Magicolor 4650DN?
If the color reproduction or density is poor on your Konica Minolta Printer, remove the imaging units and check them for damage. Replace any damaged units.
Why is my Konica Minolta Magicolor 4650DN Printer printing blank pages?
If your Konica Minolta Printer is printing blank pages, check the toner cartridges to make sure they are not empty or defective. Also, ensure that the media type set in the printer driver matches the media loaded in the printer.
Why is my Konica Minolta Printer printing so slow?
If your Konica Minolta Printer is taking too long to print, it might be set to a slow printing mode for special media like thick stock or transparencies. If you're using regular paper, ensure the media type is correctly set in the driver. Also, the printer might be in Energy Saver mode, which delays the start of printing. Disable this mode in the SYS DEFAULT MENU/ENERGY SAVER menu if you prefer.
What to do if media misfeed message stays on my Konica Minolta Printer?
If the Konica Minolta Printer is misfeeding media, and the message stays on, open and close the right side cover of the printer again to reset it. Also, recheck the media path and make sure that you have removed all of the misfed media.
Why do several sheets go through my Konica Minolta Magicolor 4650DN together?
If several sheets go through the Konica Minolta Printer together, remove the media and even up the front edges, then reload it. If the media is moist, replace it with new, dry media. Also, avoid fanning transparencies to prevent static electricity.
Why is the media wrinkled when printing from my Konica Minolta Magicolor 4650DN Printer?
If the Konica Minolta Printer is producing wrinkled media, replace the media if it is moist. Additionally, inspect the transfer roller or fuser unit for any signs of damage and contact Technical Support with the error information if needed.
What causes duplex misfeeds on my Konica Minolta Magicolor 4650DN Printer?
If your Konica Minolta Printer is experiencing duplex misfeeds, ensure you are using KONICA MINOLTA-approved media. Also, recheck the media path inside the duplex option and make sure that you have removed all of the misfed media.
Why are not all pages printing from my Konica Minolta Printer?
If not all pages print from your Konica Minolta Printer, check your cable to ensure it is the correct type and properly connected. Also, verify that the trays are loaded with media, in place, and secure.
Guide to configuring printer driver settings and default preferences.
Describes the printer's physical control panel and its functions.
Lists detailed specifications for supported media types and sizes.
Information about the printer's toner cartridges, including handling and types.
Step-by-step instructions for replacing toner cartridges.
Detailed procedure for replacing the printer's imaging units.
Instructions on how to replace the waste toner bottle.
Guide on how to replace the printer's transfer roller.
Steps for replacing the ozone filter.
Procedure for replacing the transfer belt unit.
Instructions for replacing the printer's backup battery.
Detailed steps for replacing the fuser unit, including safety precautions.
Instructions for cleaning the printer's exterior and interior components.
Steps for cleaning the printer's laser lenses to ensure print quality.
Tips and procedures to avoid paper jams and misfeeds.
Step-by-step instructions for removing jammed paper.
Troubleshooting guide for common paper feeding issues.
Solutions for various printer issues not related to media misfeeds.
Troubleshooting guide for issues affecting print quality.
Explanation of printer messages and their meanings.
General| Color | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 9600 x 600 DPI |
| Time to first page (color, normal) | 13 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Internal memory | 256 MB |
| Sound power level (standby) | 39 dB |
| Sound pressure level (printing) | 52 dB |
| Printer fonts | PCL, PostScript |
| Maximum duty cycle | 120000 pages per month |
| Number of print cartridges | 4 |
| Total input capacity | 250 sheets |
| Total output capacity | 200 sheets |
| Maximum input capacity | 850 sheets |
| Multi-Purpose tray input capacity | 100 sheets |
| Power requirements | 220/240 VAC ±10%, 50/60 ±3% Hz |
| Networking features | 10Base-T/100Base-TX/1000Base-T |
| Standard media sizes | Kai16, Kai32, UK Quarto |
| Power consumption (active) | 1200 W |
| Compatible operating systems | -Windows: Vista, Server 2003, XP, 2000 -Macintosh: OS X (10.2, 10.3, 10.4) -Linux: RedHat v9.0, SuSe v8.2 -Netware: Netware 4/5/6 |
| Media weight (tray 1) | 60 - 90 gsm |
| Paper tray media types | Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP, Ethertalk, IPX/SPX, UDP, IPP1.1, SNMP, HTTP, HTTPS, IPv6 |
| Package weight | 42000 g |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 140 W |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 15 - 85 % |
| Certification | UL, cUL, FCC-B, DOC, VCCI, CE Marking, GS, C-Tick, CDRH, WEEE, RoHS |
Weight and Dimensions| Dimensions (WxDxH) | 469 x 536 x 385 mm |
|---|
To Next Page