Configuration Menu Overview34
Entering the Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1 Press the to increase or the to decrease the first digit of the pass-
word.
2 Press the key to move the cursor to the next digit.
3 Press the to increase or the to decrease the second digit of the
password.
4 Continue these steps until all four digits of the password are specified.
5 Press the Menu/Select key.
The
PRINT/DELETE selection screen appears.
" If an incorrect password is entered, INVALID ENTRY appears and
the screen for entering the password appears again.
To Next Page
Loading...
