SL1000 User’s Guide
3-2
1 SL-Touch for SL1000 Setup
It is necessary to install 'SL-Touch for SL1000' in the Personal Computer beforehand to display the
image and to take it with a Personal Computer connected with SL1000. This chapter describes the
system requirements of the Personal Computer and the installation procedure of 'SL-Touch for
SL1000'.
1.1 Trademark Acknowledgments
IBM and IMB PC/AT are registered trademarks of International Business Machine Corporation.
Microsoft, Windows, Windows Vista and Windows 7 are registered trademarks of Microsoft
Corporation.
All other brand or product names are trademarks or registered trademarks of their respective
companies or organizations
1.2 System environment
The following are the minimum system requirements for the computer connected to the Scanner
to install the Driver. The operator should be completely familiar with basic Windows operations.
Computer Compatible with IBM PC/AT
OS Windows 7: 32 bit, 64 bit
Windows Vista: 32 bit, 64 bit SP2 or later
CPU INTEL Core i7 or more
Memory 4GB or more
Hard disk drive 1GB of available hard-disk space
Interface Hi-Speed USB 2.0
Optical disc drive CD-ROM drive
Display Display that has screen resolution (1,280 x 1,024 or more)
Recommended system requirements
CPU INTEL Core i7 2.93GHz faster
Memory 4GB or more
Hard disk drive SATA3 7200rpm 32MB or more
Video Card GeForce GT430 1GB or more
Display
Display that has screen resolution (1,920 x 1,080)
Touch Panel Touch Panel corresponding to a multi touch or display
equipped with a Touch Panel
NOTE ! It is necessary to use the display corresponding to the multi touch to enlarge the
display image by the zoom operation of the Touch Panel with Windows 7.
To Next Page
Loading...
Need help?
General
