EasyManua.ls Logo

Konig CMP Series - Maintenance and Troubleshooting; UPS Battery Lifespan and Care; Storage and Protection Guidelines

Konig CMP Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When the UPS is overloaded, the OVERLOAD icon illuminates and the UPS emits continuous alarm for 30 seconds to warn
an overload status. Disconnect nonessential load equipment from UPS to eliminate the overload.
Maintenance
1. With normal use, a UPS battery will last three to six years depends on number of discharge and temperature.
Replacement and servicing of the battery should be performed or supervised by personnel knowledgeable of batteries and
their precautions. Keep unauthorized persons away.
2. Charge the UPS's battery every 3 months during extended storage.
3. Disconnect the power during extended storage to avoid overcharge of the battery.
4. Avoid overload or short circuit though the UPS have built-in overload and short circuit protecting function.
Accessories inside packing:
* CMP-UPS500: 3A/250V fuse (IPC) & Telephone cable (IPC)
* CMP-UPS650: 3A/250V fuse (IPC) & Telephone cable (IPC)
* CMP-UPS800: 5A/250V fuse (IPC) & Telephone cable (IPC)
* CMP-UPS1000: 5A/250V fuse (IPC) & Telephone cable (IPC)
* CMP-UPS1200: 5A/250V fuse (IPC) & Telephone cable (IPC)

Related product manuals