KOOBRICK Boxi - Page 46

Page 46
This is the name of the Document
You can select the partition and schedule a check and x job here.
Parameter
Description
Select Partitions
Select all partitions you want to check.
Run Time
You can select “Now” to let the check start immediately.
You also can select “Later” and assign a schedule time
below.
Action
If you select “Check errors”, the Koobrick Boxi only checks
for le system errors. The Koobrick Boxi will not x the error
and the data will not be modied. So it is a save operation.
If you select “Check errors and x them”, the Koobrick Boxi
will try to x errors found in the le system. If there are too
many errors in the le system and the Koobrick Boxi fails to
x all of them, some of your data may be lost.
Added Task
It shows the added check and x task.
Delete the task
Click “Delete the task” to delete the check and x task.
Apply
Click “Apply” to submit the check and x task.
Report
Click “Report” to read the reports of check and x tasks.
Boxi User Manual
Version 1.0