The ice-making time countdown display; when C is displayed, it is the ambient temperature display.
2.
The ice making and de-icing symbols are displayed. The ice is being made when the symbol is
rotating, and it is being de-iced when the symbol is flashing.
3.
Automatic cleaning symbol displays.
4.
On / off symbol display.
5.
Error code E1 means is the ambient temperature sensor is damaged, E2 Error means ice
making is malfunctioning
or there is a refrigerant leakage.
6.
The machine's water intake and water shortage are displayed. The blinking arrow indicates that
water is entering the machine. The whole symbol is on to indicate that the machine is short of
water.
7.
The machine is full of ice. The machine will continue to make ice after removing the ice cubes.
8.
Setting display. “H” means “hours”. If it displayed on the LCD, it means countdown time for ON
or OFF regular timing; while “M” displayed, it is for ice making time setting.
D and E, "-", "+" buttons:
Adjust the length of the ice making time, the initial value is 0, you can adjust it by pressing the +
and – buttons this will increase/decrees the time by one minute;
Adjust the length of the timer, the default is 1, you can adjust it by pressing the + and – buttons this
will increase/decrees the time by one hour.
F. "Light" button (not all models have this function):
Press the button, the host bottom light will turn on, and press it again, the light will turn off.
If the
light does not turn off for a long time, the light will turn off automatically.
Remove the unit from the carton and remove all packing foam, bags and tape. Please
check
ensure that you revived the flowing parts and accessories.
1 White water inlet pipe, 1 1/4’ to 1/3’ quick connection,
1 L-type 1/3’quick connection to 1/3’ plug-in
1 Ice scoop, 1 white
drain pipe, and 4 adjustable
feet. Please contact us immediately if any parts are
missing
2.
The power socket must be reliably grounded, and a
separate plug is required to supply power to the
machine.
Water pipe
Evaporator
Water Tank
4
To Next Page
Loading...
