38
OPERATING THE APPLIANCE.
DO NOT MAKE CONNECTIONS THROUGH EXTENSION CORDS OR
DOUBLE PLUGS.
NEVER LET THE POWER CORD RUN ON SUSPIGENT SHARP
EDGES, AVOID CRUSHING IT.
DO NOT LEAVE THE DEVICE EXPOSED TO THE ELEMENTS RAIN,
FROST, SUN, ETC..
DO NOT USE THE DEVICE:
WITH WET OR DAMP HANDS;
IF IT HAS BEEN DROPPED AND HAS OBVIOUS BREAKS OR
MALFUNCTIONS;
IF THE ELECTRICAL POWER PLUG OR CORD IS DEFECTIVE;
IN HUMID OR GASSATURATED ENVIRONMENT
DO NOT COVER THE DEVICE WITH TOWELS, CLOTHING, ETC.
SET THE DEVICE ONLY ON HORIZONTAL AND STABLE PLANES.
ALWAYS REMOVE THE PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE PERFORMING ANY
CLEANING OR MAINTENANCE WORK OR FILLING.
ANY REPAIRS MUST BE CARRIED OUT ONLY BY A TRAINED
TECHNICIAN. FIXING THE APPLIANCE YOURSELF CAN BE
EXTREMELY DANGEROUS.
AN APPLIANCE THAT IS OUT OF USE MUST BE RENDERED
UNUSABLE BY CUTTING THE POWER SUPPLY CORD BEFORE
DISPOSING OF IT.
CLEAN THE OUTSIDE OF THE APPLIANCE USING A DAMP CLOTH.
DO NOT USE SOLVENTS OR ABRASIVE CLEANERS.
To Next Page
Loading...