57
Press the rinse Plus button in standby mode, and the rinse plus function indicator will be on. At the
same time, add a rinse process in the washing process, and the time after adding the function will
be displayed in the remaining time window. The rinse function will cancelled when it is pressed
again, if it does not run to the rinse stage during operation, press the pause button, The rinsing
button can be added or cancelled, and the rinsing function cannot be selected or cancelled during
operation.
• Smart Start
The smart start program is an intelligent program, which can be entered and run automatically in
the standby and power o states. Under the smart start program, the washing temperature, water
level and washing time are automatically set according to the weighing results, and the washing
parameters do not need to be set by the user.
• Delay
With the Delayed Start function the startup of the programme may be delayed up to hours. Delayed
start time can be increased by increments of 1 hour.
Info: Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the auxiliary functions. Set the desired time by pressing
the Delay button. Press Start / Pause button. The delayed start time you have set is displayed.
Delayed start countdown starts. The‘:’ in the display time blinks once every second, and the time
gradually decreases.
Info: Additional laundry may be loaded during the delayed start period.
At the end of the countdown, duration of the selected programme will be displayed. ‘:’symbol will
disappear and the selected programme will start.
9.2 Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
Set the Delayed Start period to zero or turn the Programme Selection knob to any programme. Thus,
Delayed Start function will be canceled. The End/Cancel light flashes continuously. Then, select the
programme you want to run again. Press Start / Pause button to start the programme.
9.3 Starting the programme
Press Start / Pause button to start the programme. Programme follow-up light showing the startup
of the programme will turn on.
If no programme is started or no key is pressed ithin 10 minute during programme selection
process, the machine will switch to turn o mode and the temperature speed and other lights will
turn o.
. CHILD LOCK
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid
any changes in a running programme.
To Next Page
Loading...