5
5
Steam washing process is to produce steam in the washing process, improve the washing eect,
and at the same time, steam iron the clothes to prevent wrinkles.
• Quick 15’
Quick wash 15 is a fast washing program for a small amount of non dirty clothes. Its optional
washing temperature range is narrow and the maximum speed of dehydration is low..
• Mix
Use this programme to wash your cotton and synthetic clothes together without sorting them.
• 20°C
New European standard special program, used to wash some mild clothes, the temperature can
only be selected at 20 °C to protect the clothes
• ECO 40-60
For washing cotton garments that are normally washable at 40°C or 60°C, while washing in the
same cycle. This cycle is used to assess compliance with EU ecodesign regulations.
8.4 Special programmes
For specific applications, select any of the following programmes.
• Rinse & Spin
A program designed for users to rinse and dehydrate
• Spin
Use this programme to apply an additional spin cycle for your laundry or to drain the water in the
machine. Before selecting this programme, select the desired spin speed and press Start / Pause
button. First, the machine will drain the water inside of it. Then, it will spin the laundry with the set
spin speed and drain the water coming out of them. If you wish to drain only the water without
spinning your laundry, select the Pump+Spin programme and then select the No Spin function with
the help of Spin Speed Adjustment button. Press Start / Pause button.
Info: Use a lower spin speed for delicate laundries.
8.5 Temperature selection
Whenever a new program is selected, the default temperature of the selected program is displayed
in the temperature indicator. To adjust the temperature, press the temperature button. The
temperature will gradually increase and cycle to the lowest when the maximum is reached.
Info: If the programme has not reached the heating step, you can change the temperature without
switching the machine to Pause mode.
8.6 Spin speed selection
Whenever a new program is selected, the default dehydration speed of the selected program is
displayed on the speed indicator. To adjust the dehydration speed, press the speed button. The
rotation speed increases gradually and circulates to the lowest when it reaches the highest.
. PROGRAMME AND CONSUMPTION TABLE
To Next Page
Loading...