5
9
STARTED
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme is running.
The light of the step which the machine is in starts flashing in the Programme Follow-up indicator
to show that the machine has been switched to the pause mode. Also, when the loading door is
ready to be opened, procedure step light is steady on, door lock light is o.
13.1 Changing the speed and temperature settings for auxiliary functions
Depending on the step the programme has reached, you may cancel or activate the auxiliary
functions; see, “Auxiliary function selection”. You may also change the speed and temperature
settings; see, “Spin speed selection” and “Temperature selection”.
Info: If no change is allowed, the indicator light will be on.
13.2 Adding or taking out laundry
Press the Start / Pause button to switch the machine to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will flash.
Wait until the Loading Door can be opened. Open the Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if
necessary. Press Start / Pause button to start the machine.
13.3 Canceling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be canceled. End / Cancel light will flash continuously to notify that
the programme has been canceled. Pump function is activated for 1-2 minutes regardless of the
programme step, and whether there is water in the machine or not. After this period, your machine
will be ready to start with the first step of the new programme.
Depending on the step where the programme was canceled in, you may have to put detergent and
softener again for the programme you have selected anew.
13.4 End of programme
“End” appears on the display at the end of the programme. Wait until the loading door light
illuminates steadily. Press On / O button to switch o the machine. Take out your laundry and
close the loading door. Your machine is ready for the next washing cycle.
. MAINTENANCE AND CLEANING
Service life of the product extends and frequently faced problems decrease if cleaned at regular
intervals.
To Next Page
Loading...