5
8
Info: If the Programme Selection knob is turned when the Child Lock is active, “ ” appears on
the display. The Child Lock does not allow any change in the programmes and the selected
temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is
active, previously selected programme will continue running.
10.1 To activate the Child Lock:
Press and hold 3st and 4nd Auxiliary Function buttons for 3 seconds while any programme is
running. The Child Lock is activated. If you press any button or turn the Programme Selection knob
when the Child Lock is active, “CL” will appear on the display and blink 3 times.
10.2 To deactivate the Child Lock:
Pre ss and hold 3st and 4nd auxiliary function buttons for 3 seconds while any programme is
running. The Child Lock is deactivated.
In addition to the above way, to remove the child lock, there are two ways:
1. The program is automatically removed after running.
2. The alarm will be automatically lifted.
Child Lock is not deactivated after power failures or when the machine is unplugged.
. PROGRESS OF PROGRAMME
Progress of a running programme can be followed from the Programme Follow-up indicator. At the
beginning of every programme step, the relevant indicator light will turn on and the indicator light
that completes the step will be on. You can change the auxiliary functions, speed and temperature
settings. You need to stop the program flow before changing the auxiliary functions, speed, and
emperature settings while the programme is running. To do this, the change you are going to make
must be in a step after the running programme step. If the change is not compatible,press the
relevant key sound prompt tone.
Info: If the machine does not pass to the spinning step, Rinse Hold function might be active or
the automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the machine.
. LOADING DOOR LOCK
There is a locking system on the loading door of the machine that prevents opening of the door in
cases when the water level is unsuitable. Loading door light will start flashing when the machine
is switched to Pause mode. Machine checks the level of the water inside. If the level is suitable,
Loading Door light illuminates steadily within 1-2 minutes and the loading door can be opened.
If the level is unsuitable, Loading Door light turns o and the loading door cannot be opened. If you
are obliged to open the Loading Door while the Loading Door light is o, you have to cancel the
current programme; see “Canceling the programme”.
. CHANGING THE SELECTIONS AFTER PROGRAMME HAS
To Next Page
Loading...