4
6
2.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable
for any damages that will arise when the product is used without grounding in accordance with
the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the “Technical specifications” section must be equal to your mains
voltage.
• Do not make connections via extension cables or multiplugs.
warning: Damaged power cables must be replaced by the Authorized Service Agents.
2.8 Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water thatmay have rimained in the product. (SEE 5.5)
4. Install transportation safety bolts in the reverse order of removal procedure; (SEE 2.3))
Info: Never move the product without the transportation safety bolts properly fixed in place!
warning: Packaging materials are dangerous to children. Keep packaging materials in a safe place
away from reach of the children.
. PREPARATION:
•Sort laundry according to type of fabric, colour, and degree of soiling and allowable water
temperature.
• Always obey the instructions given on the garment tags..
• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons
will damage the machine. Remove the metal pieces or wash the clothes by putting them in a
laundry bag or pillow case.
• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets
inside out and brush. Such objects may damage the product or cause
To Next Page
Loading...