56
Tips:
• at the end of the programming process, check whether the key has been
associated before continuing with the next
• in order to avoid confusion, associate the keys with the same function,
for example in point 3 press the ON / OFF key on the remote control of the
receiver and in point 4 press the same key on the remote control of the TV,
Attention: it is possible to associate only the buttons of the remote control
supplied inside the white rectangle (ON / OFF, TV / AV; VOL + and VOL-).
SET function key and cannot be associated.
Functions not available
Some functions may not be available in this case a window like the one
shown will appear.
Troubleshooting
There can be different causes for the abnormal operation of the appliance.
The receiver may hang, in which case unplug it and wait 30 seconds before
reinserting it. If the appliance does not work properly, refer to the following
tables for possible solutions.
To Next Page
Loading...