Ν DP interface supports 1920*1080,165Hz; HDMI 1.4 supports 1920×1080, 144Hz.
Please choose the connection method you need.
Ν
Ν
Ν
Ν
Connect and use the source device.
Read the following before installing the product.
Before installing, please check the shape of the two ports of the attached signal
cable and the shape and location of the ports on the product and external
equipment.
Before connecting the signal lines, be sure to connect from the product and the
external equipment to prevent damage to the product due to short circuits or
over-current.
Connect the power cord back to the product and external equipment after
properly connecting all the signal wires.
After the installation, please be sure to read the user guide to familiarize with
the correct use of products required products’ features, cautions, and other
information.
As for the operation and use of the source device, please read the user guide provided by
the source device. If the original device signal is abnormal, it is recommended to contact
the source device manufacturer rst.
If you need Koorui’s assistance, please contact Koorui’s after-sales sta.
2.5 Adjust Product Inclination
Adjustable display with
titl from -5°~20°
09
To Next Page
Loading...
Need help?
General
