Korg D4 - Cpyv-Trk: Copy a Virtual Track; Delv-Trk: Delete a Virtual Track

60
4. InTime ..............................................................................
Specify the starting time in the edit source track.
5. OutTime............................................................................
Specify the ending time in the edit source track.
6. ToTime..............................................................................
Specify the starting time in the edit destination track. For
the procedure, refer to “1. Track editing: Copying a track”
in “Step 10. Track editing” of the Operation section.
7. EndTime............................................................................
Specify the ending time in the edit destination track. For
the procedure, see To Time.
8. PitchFix............................................................... [Yes, No]
Specify whether the playback pitch will be unaffected by
the expansion/compression operation.
Yes: The pitch will not be affected by the operation.
No: The pitch will change according to the degree of
expansion or compression.
9. Exp OK?............................................................ [Yes, No]
Select “Yes” and press the CURSOR [ ] key to execute
the operation.
The processing time until the operation is completed
(“Finish!”) will be longer in proportion to the length of the
specified region (In–Out).
P.6 CpyV-Trk: Copy a virtual track
This operation copies all the track data from a virtual
track (“CpyFromV”) of the edit-source track (“CpyFrom”)
to the specified virtual track (“CpyToV”) of the edit-desti-
nation track (“CpyTo”).
When this operation is executed, the edit destination track
will be overwritten. Verify the contents of the edit destina-
tion track before you execute this operation.
1. CpyFrom.............................................[1, 2, 3, 4, 1-2, 3-4]
Select the edit source track.
2. CpyFromV ........................................[A, B, C, D, E, F, G, H]
Select the virtual track of the edit source track.
3. CpyTo.................................................[1, 2, 3, 4/1-2, 3-4]
Select the edit destination track.
4. CpyToV.............................................[A, B, C, D, E, F, G, H]
Select the virtual track of the edit destination track.
5. CpyV OK? .......................................................... [Yes, No]
Select “Yes” and press the CURSOR [ ] key to execute
the operation.
P.7 DelV-Trk: Delete a virtual track
This operation deletes all the track data from the specified vir-
tual track (“DelToV”) of the edit-destination track (“DelTo”).
When this operation is executed, the edit destination track
will be overwritten. Verify the contents of the edit destina-
tion track before you execute this operation.
1. DelTo..................................................[1, 2, 3, 4, 1-2, 3-4]
Select the edit destination track.
2. DelToV..............................................[A, B, C, D, E, F, G, H]
Select the virtual track of the edit destination track.
3. DelV OK? ........................................................... [Yes, No]
Select “Yes” and press the CURSOR [ ] key to execute
the operation.