Do you have a question about the Korg DS-DAC-10 and is the answer not in the manual?
Type | USB DAC |
---|---|
Bit Depth | 16-bit, 24-bit |
Power Supply | USB bus power |
Compatibility | Windows, macOS, iOS |
Sampling Frequency | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
Frequency Response | 20Hz - 20kHz |
S/N | 100 dB |
THD+N | 0.005% |
Output | RCA |
Headphone Output | 1/4 inch TRS |
Input | USB |
Volume Control | Yes |
Overview of the DS-DAC-100, DS-DAC-100m, and DS-DAC-10 USB DAC units and their capabilities.
Details the system specifications for Windows and Mac OS necessary for using the DS-DAC devices.
Instructions on how to access and download the KORG AudioGate and DS-DAC driver setup program.
Step-by-step guide for installing the KORG USB Audio Device Driver on Windows 7/8 systems.
Step-by-step guide for installing the KORG USB Audio Device Driver on Mac OS systems.
Configuring playback modes (PCM/DSD) and selecting sample rates for audio output.
Adjusting streaming and ASIO buffer sizes to optimize playback performance and latency.
Diagrams and labels identifying the physical connectors and controls on the DS-DAC-100, DS-DAC-100m, and DS-DAC-10.
Steps to connect the DS-DAC unit to a computer and prepare for audio playback.
Detailed guide for performing DSD native playback using AudioGate on Windows.
Instructions for playing audio through AudioGate using DirectSound or WASAPI drivers on Windows.
Detailed guide for performing DSD native playback using AudioGate on Mac OS.
Common issues related to power, recognition, and stability, with possible causes and solutions.
Troubleshooting steps for when no audio output is heard from the device.
Explanation of indicator lights and procedures for firmware updates.
Solutions for problems preventing the selection of DSD mode, often related to AudioGate version.
Troubleshooting steps for issues with changing the sample rate on Windows systems.
Guidance on resolving audio interruptions or noise during playback.
Tips for optimizing ASIO playback performance by adjusting buffer sizes.
Recommendations for setting the device mode to PCM when used as the default sound device.
Explanation of potential clicks when the sample rate is set to Auto or manually changed.
Advice to use a USB 2.0 port for the DS-DAC-100/100m/10.
Advice on potential performance issues caused by running multiple applications concurrently.
Information about potential hiss with high-efficiency, low-impedance earphones.
Detailed technical specifications for the DS-DAC-100 model, covering audio interface, general, main specs, and connectors.
Detailed technical specifications for the DS-DAC-100m model, covering audio interface, general, main specs, and connectors.
Detailed technical specifications for the DS-DAC-10 model, covering audio interface, general, main specs, and connectors.