20
Rhythm Pattern/Variation
Use the Value encoder to select the rhythm pattern (☞p.52
“Rhythm pattern list”). Use the ENTER/REC button to
select the rhythm pattern variation.
BASIC: Basic rhythm pattern.
VARI1: Variation 1. The variation 1 icon will light.
VARI2: Variation 2. The variation 2 icon will light.
Rhythm pattern
variation
icon
Tempo
Use the Value encoder to set the tempo in the range of
40–240 bpm. You can also set the tempo by pressing the
TAP/BYPASS button twice at the desired rhythm.
Tempo
Bass Key
Use the ENTER/REC button to select a bass pattern vari-
ation. Depending on the rhythm pattern that you have
selected, some bass lines will include a chord progression.
OFF: Bass pattern off.
BASIC: Basic bass pattern.
VARI1: Variation 1. This is a major chord bass pattern.
The LCD shows the variation 1 icon.
VARI2: Variation 2. This is a minor chord bass pattern.
The LCD shows the variation 2 icon.
Use the Value encoder to set the key in a range of C,
C#...A#, B allowing you to practice your guitar or bass
in a scale that matches that key.
Root note
If the bass pattern is variation 2 (VARI2), an “m” is shown
beside the root note.
If “MTRONM0”–“MTRONM9”(metronome) is select-
ed as the rhythm pattern, there will be no bass notes, and
this screen will not appear.
To Next Page
Loading...
