49
DLY: Delay Modeling
Each delay type, (1, 2, 3, 4, 5) have different amounts of feedback. The delay time is set by the interval at which you
press the TAP/BYPASS button twice. The specified delay time can be checked by holding down the TAP/BYPASS
button.
TYPE (π/† CURSOR) VALUE (Value encoder)
SLAP1…5 A slap delay effect that produces a distinctive short delay. The
maximum delay time is 500 msec. The delay time will be specified as
one-fourth of the interval at which you press TAP-BYPASS.
ECHO1…5 Tape echo simulation with a warm tone. Delay time: up to 2 sec.
CLRDLY1…5 A clear-sounding delay typical of digital delay units.
Maximum delay time: 1 second.
PPDLY1…5 Dual-tapped ping-pong delay that pans left and right. Maximum
delay time: 2 second.
MULTI1…5 Dual-head tape echo simulation with special stereo design. Creates a
spacious reverberation. Maximum delay time: 2 second.
Adjusts effect level (0.0...10.0).
RVSDLY A reverse-delay (backward playback) effect.
Maximum delay time: 1 second.
Specifies the balance between the
effect and dry sounds (0.0…10.0).
To Next Page
Loading...
