Korg SDD-3000 User Manual

4 Chorus
Used to obtain a normal chorus effect. Adjust the modulation intensity and Frequency according to the application.
5 Flanging
Used to obtain a flanging effect. If the feedback level is increased too much, oscillations will occur.
6 Envelope flanger
Flanging sound is achieved that is swept by the dynamics (volume level) of the input signal. Especìally effective with
percussive sounds (cymbal, drums, etc.).
7 Trill delay
Used to obtain a trill effect. Adjust the frequency according to the tempo of the tune and adjust the intensity to achieve
the proper pitch change.

Korg SDD-3000 Specifications

General

Type	Digital Delay
Sampling Frequency	48 kHz
AD/DA Conversion	24-bit
Input Impedance	1 MΩ
Output Impedance	1 kΩ
Controls	Delay Time, Feedback, Modulation Depth
Total Harmonic Distortion	0.05%
Weight	1.5 kg
Modulation	LFO (Sine, Square, Random)