What to do if buttons do not operate as indicated by Korg Recording Equipment nanoKEY Studio?
If the buttons on your Korg nanoKEY Studio aren't operating as expected, it could be that your software doesn't fully support some functions or operates them differently.
What to do if Korg Recording Equipment nanoKEY Studio won’t turn on?
If your Korg nanoKEY Studio won’t turn on, it might be due to insufficient power. Ensure it’s directly connected to your computer's USB port without a USB hub. Try using the supplied USB cable to rule out any issues with your current cable. Also, verify that the Mode switch is set to “ ” (Battery). Finally, depleted batteries can cause this issue, so replace them with new ones.
What to do if there is no response from the software with Korg Recording Equipment nanoKEY Studio?
If your software isn't responding to the Korg nanoKEY Studio, first ensure that the nanoKEY Studio is correctly specified in your software’s MIDI port setup. Your software must be set up, so refer to “Customizing Controllers” on page 14 and the instruction manual for your software. Also, your software may not support some functions, so check its instruction manual. Lastly, confirm that the MIDI channel for messages transmitted by the nanoKEY Studio matches the MIDI channel set in your software.
Why does Korg Recording Equipment nanoKEY Studio wireless connection cut out?
If the wireless connection of your Korg nanoKEY Studio keeps cutting out, make sure that your computer or iPhone/iPad is not too far away from the nanoKEY Studio.
General| Pad color | White |
|---|---|
| Knobs color | Black |
| Control type | Buttons, Rotary |
| Number of pads | 8 |
| Backlight buttons | Yes |
| MIDI-keyboard number of keys | 25 keys |
| Interface | USB |
| Battery type | AAA |
| Power source type | Battery, USB |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 278 mm |
| Height | 33 mm |
| Weight | 471 g |
Details the 25 velocity-sensing keys with Scale Guide for error-free playing.
Explains the eight touch-sensitive pads for drum triggering and chord playing.
Describes the two-axis touchpad for intuitive control of two parameters.
Covers the eight knobs for real-time control of musical software parameters.
Details the eight scenes for instant access to favorite software settings.
Highlights convenient USB and wireless connectivity with various devices.
Instructions for connecting wirelessly, including battery installation and power management.
Steps for connecting via USB, including power and driver installation.
How to shift the keyboard's octave range up or down using dedicated buttons.
Adjusting the keyboard's pitch in semitone steps and setting the key.
Functionality of the sustain button for sending sustain MIDI messages.
Using the Easy Scale function for playing in tune with selected scales and keys.
Utilizing keyboard backlighting to indicate notes of a specified scale and key.
Using the touchpad to generate notes in tune with the selected scale and key.
Assigning MIDI control messages to the touchpad's X and Y axes for simultaneous control.
Using the touchpad for transmitting pitch bend and modulation messages.
Using trigger pads to play chords based on the current scale and key.
Selecting from various arpeggio patterns like Up, Down, Alt1, Alt2, Random, and Trigger.
Adjusting the arpeggiator tempo using the Tap Tempo function by pressing the button.
Selecting different rhythm patterns for the arpeggiator to enhance its performance.
Synchronizing the arpeggiator with keyboard, trigger pads, or touchpad input for precise timing.
Adjusting the octave range of the arpeggio pattern to repeat over multiple octaves.
Enabling the arpeggiator pattern to continue playing after releasing controls.
How to switch between the eight user-configurable scenes for different software control.
Information on downloading and using the KORG KONTROL Editor software for customization.
Parameters that address the function of specific controllers within a selected Scene.
Parameters controlling the overall operation of the nanoKEY Studio, regardless of scene.
MIDI channel settings for the Keyboard and Touchpad in Pitch/Mod mode.
Settings for Trigger Pads including Assign Type, Pad Behavior, and MIDI Channel.
MIDI channel settings for the Chord Pad feature.
Settings for enabling knobs and their MIDI channels.
MIDI channel and Y-axis enable settings for Touchpad in Touch Scale mode.
MIDI channel settings for the Touchpad in X-Y Control mode.
MIDI channel and Mod enable settings for the Touchpad in Pitch/Mod mode.
Assign type, MIDI channel, and value settings for the Sustain button.
Specifies Global MIDI Channel and Battery Type settings.
Settings for the wireless device name.
Specifies how keyboard volume changes with playing force.
Covers Trigger Pad Velocity Curve, Constant Value, and Sensitivity.
Adjusts Touchpad Pitch/Mod Return Speed and Touch Scale Note On Velocity.
Adjusts the pitch range for chords played in Chord Pad mode.
Adjusts the pitch range for chords in Easy Scale mode.
Synchronizes the nanoKEY Studio Arpeggiator with software or DAW.
Configures Auto Power Off and Auto LED Off functions.
Manages LED Brightness, Illumination, and Eco Mode.
Procedure to reset all nanoKEY Studio settings to their factory defaults.
Solutions for common issues like the device not turning on or connection problems.
Lists the minimum system requirements for Windows, Mac, and iOS.
To Next Page
