5
Wireless Connection Setup
In order to use the nanoKEY Studio wirelessly, a wireless connection
must be established. Refer to “Using a wireless connection” in the
Quick Start Guide to set up the wireless connection.
With an iPhone/iPad or Mac, a wireless connection must be
established each time.
Wireless Operation with USB Power
The wireless function of the nanoKEY Studio can be used in
combination with a USB connection.
While power is supplied from the USB port of the computer, the
wireless function of the nanoKEY Studio can be used to connect
it to an iPhone/iPad, etc.
Turning the Wireless Feature On and Off
While holding down the Shift/Tap button, press Trigger Pad 4
(Wireless) to turn the wireless feature On or Off.
TIP When the mode switch is set to “ ” (Battery), the wireless
function cannot be turned off.
If the nanoKEY Studio is being used in an environment
where radio waves cannot be transmitted, turn off the wire-
less function.
Using a USB Connection
Making Connections and Turning On the Power
1. Set the mode switch to “ (USB)”.
2. Use the included USB cable to connect the nanoKEY Studio
to a USB port on your computer. The nanoKEY Studio turns
on, and the power LED lights up.
The included USB cable must be used.
In order to use the nanoKEY Studio functions, settings must
be specified to match your app. Refer to the Owner’s Manu-
al and specify the settings.
TIP When you first connect the nanoKEY Studio to your Win-
dows computer, a driver will be installed automatically.
TIP With the driver pre-installed with Windows, nanoKEY Studio
cannot be used by multiple applications simultaneously. If
you want to use the nanoKEY Studio with multiple applica-
tions simultaneously, you must install the KORG USB-MIDI
driver. Download the KORG USB-MIDI driver from the Korg
website. (http://www.korg.com/)
Turning Off the Power
Set the mode switch to “Standby”. The nanoKEY Studio and the
power LED turn off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
