Korg nanoKEY Studio User Manual

14
Customizing Controllers
KORG KONTROL Editor Software
The KORG KONTROL Editor software is required to customize the
operation of the nanoKEY Studio. Download the software from the
Korg website (http://www.korg.com/), and install the software by
following the instructions in the supplied document.
TIP For details on installing and using the KORG KONTROL Edi-
tor software, refer to the instruction manual for that soft-
ware.
Types of Parameters
The nanoKEY Studio contains two types of customizable parame-
ters. Scene Parameters address the function of specific controllers
inside of the selected Scene. Global Parameters control the overall
operation of the nanoKEY Studio, regardless of the selected scene.
Scene Parameters
These parameters determine how your software will react when
you operate a controller on the nanoKEY Studio in a specific
Scene. Eight user-configurable scenes can be created and saved
in the nanoKEY Studio. By preparing a separate Scene for each
software title you are using, you can achieve instant control of
them all simply by switching scenes.
Global Parameters
These parameters specify general behavior of the
nanoKEY Studio, such as velocity curves of the keyboard and
trigger pads, as well as energy-saving features. The global pa-
rameters will be shared among all scenes.

Korg nanoKEY Studio Specifications

General

Pad color	White
Knobs color	Black
Control type	Buttons, Rotary
Number of pads	8
Backlight buttons	Yes
MIDI-keyboard number of keys	25 keys
Interface	USB
Battery type	AAA
Power source type	Battery, USB
Number of batteries supported	2

Weight and Dimensions

Depth	160 mm
Width	278 mm
Height	33 mm
Weight	471 g