3
New “Rec Quantize” settings
You can now record in real time while applying quantization.
1. Press the GLOBAL button to enter global mode.
2. Set the quantize threshold (boundary value) in the “RECORD-
INGS” setting, which was newly added to pad A-12 in global
mode.
Rec Input
Quantized
time
STEPSTEP
STEP
(value: 1/1Step)
♪ ♪ ♪ ♪
♪ ♪
♪
♪
¢
Rec Quantize settings
Pad position Global parameter
name
PARAM knob Value (initial value is in
boldface)
Parameter details, remarks
A-12 RECORDINGS PARAM1 None, 1/8Step, 1/4Step,
1/2Step, 1/1Step
The “None” setting produc-
es no effect
(same as previous version).
New step recording functionality
In addition to the existing input method in which you turn on/
off the desired steps in gate mode, a method of step recording
has been added for inputting notes in order, starting with the
rst step.
1. With the sequencer stopped, press the (REC) button and
then click the Track buttons A–D.
2. The unit switches to keyboard mode (or drum pad mode for
track D) and the rst step blinks, indicating that the unit is
waiting for input (all steps that are waiting blink white).
REST
Next Step (or TIE)
STOP (and Exit)
3. Press a note on the keyboard (64 pads), the REST button or
elsewhere. The note name, rest or other information is shown
in the display.
4. When you take your nger off the keyboard, the note, rest, or
tie is recorded in that step, and the sequencer automatically
moves to the next step.
Recording notes
The note names for the keys you press on the keyboard (or for
track D, the drum pad) are shown on the display. Check the
note name in the display. If it is correct, release your nger to
record that note.
TIP You can input a chord by pressing more notes on the keyboard
without taking your ngers off.
Recording a rest
You can record a rest by pressing the REST button.
To Next Page
Loading...
