Need help?Do you have a question about the Korg mr-2 and is the answer not in the manual?
General| Bit Depth | 16-bit, 24-bit |
|---|---|
| USB | USB 2.0 |
| Type | Portable Digital Recorder |
| Recording Format | WAV, MP3 |
| Inputs | XLR/TRS combo jack x 2 |
| Sampling Rate | 44.1kHz, 48kHz |
| Storage | SD/SDHC Card |
| Weight | 300 g |
| Power | AC adapter |
| Microphone | Built-in stereo condenser microphones |
| Outputs | Headphones |
Covers location, power, handling, foreign matter prevention, and electrical interference.
Details the location and function of buttons, jacks, and indicators on the MR-2's exterior.
Explains the function of the Display, Menu button, REC button, Controller buttons, Mic Dial, and others.
Guidance on inserting/replacing batteries and expected battery performance.
Instructions for inserting, removing, supported types, and formatting memory cards.
Covers the procedure for turning the unit on/off and the auto-shutdown feature.
Guides on selecting input sources and adjusting the built-in microphone direction.
Step-by-step guide to choosing project recording formats like WAV, MP2, MP3, DSDIFF, etc.
Details settings for WAV, MP2, MP3 formats including bit rate, sampling frequency, and stereo/mono.
Guides on setting manual or automatic gain control for optimal input levels.
Covers the steps to initiate, pause, resume, and end a recording session.
Instructions for starting, pausing, stopping, and searching during playback.
Steps to access the REC SETTING screen via the MENU button to adjust parameters.
Details microphone sensitivity, low cut, limiter, bass, and stereo enhancer settings.
Explains manual and auto gain control, target levels, and gain increment/decrement.
Procedure for deleting files, noting that deleted items cannot be recovered.
Details the process of restoring the MR-2 to its original factory default settings.
Instructions for erasing all data from the memory card and preparing it for the MR-2.
Step-by-step instructions for updating the MR-2's system software using a computer.
Connects the MR-2 to a computer as a mass storage device for file transfer.
Solutions for power not turning on, blank display, or dark screen.
Troubleshooting no sound, playback problems, input issues, and recording failures.
Troubleshooting computer detection, release, and driver installation problems.
Addresses Card Error, Card Full, Card too busy, Check Sum, and System File errors.
To Next Page
