Korg mr-2 - Troubleshooting Common Issues; Power and Display Problems; Audio and Recording Issues; Button and Operation Issues

52
Appendix
Troubleshooting
The power does not turn on
•Thebatteriesmaybeexhausted.
• MakesurethattheUSBbuspowerisconnectedcorrectly.
Nothing appears in the display
•Isthecontrastadjustedcorrectly?(seepage41)
Display is dark
•Isthebacklightsetto“Off”?(seepage31)
The LEDs do not turn on
•The“LED”settingmaybesetto “Off.”(seepage31)
No sound
•IstheMR‐2andtheconnectedequipmentpow
ered‐on?
(seepage9)
•Aretheamporheadphoneconnectionsincorrect?
•The“Monitor”settingintheRECSETTINGscreensettingmaybe
setto“Off.”(seepage22)
Can’t hear the playback
•Isthevolumesetto“0”?
Can’t hear the audio input
•Aretherecordingsettingscorrect?
•Istherecordinglevelraised?
• Makesurethataudioisbeinginput.
Inthemeter/counte
rscr
een,verifythatthelevelmetersaremoving.
Can’t record
•Istherecordingleveltoolow?
•Istheresufficientmemorycardspaceremaining?
Setthecounterdisplay(“CounterMode”)to“Free”andcheck
theremainingtimeavailableforrecording.(seepage41)
Nothing happens when you press a button
•TheHOLDswitc h maybeengaged.