Korg mr-2 - USB and Error Message Troubleshooting; USB Connection and Detection Issues; Understanding MR-2 Messages

53
USB
Your computer does not detect the MR-2
•IstheUSBcableconnectedcorrectly?(seepage45)
 Re‐connectthecable..
Can’t release the MR-2 from your computer
•Theprocedurewilldependontheoperatingsystemofyourcom‐
puter.(seepage45)
When you connect the MR-2, you are asked to install software or a
device driver
•DoestheMR ‐2supporttheversionoftheoperatingsystemyour
computerisrunning?(seepage45)
Various messages
ThemessagedialogboxwilldisappearwhenyoupresstheConfirmation
button(thecentercontrollerbutton).
Execution messages
Completed.
•Theoperationhasbeensuccessfullycompleted.
Working...
•Theoperationisbeingcarriedout.Pleasewaituntilthism essage
disappears.
Error messages
Can’t Delete. SDCARD Protected.
•Theproject/filecouldnotbedeleted.Pleasedisablethememory
card’sprotectsetting.
Can’t Execute.
•Thisoperationcannotbeperformedatthistime.
Can’t execute Update System. Use USB bus power,
•
TheUSBbuspowerisnotconnected.Softwareupdatecannotbeexecuted.
 ConnecttheUSBbuspower,thentryagaintoupdatethesystem
software.
Can’t Record. SDCARD Protected
•Recordingcouldnotbeperformed.Pleasedisablethememory
card’sprotectsetting.