Korg mr-2 - Software and Storage Management; Software Update Process

43
2. Usethecontrollerbuttonstoselectandconfirm“SDFormat.”
Adialogmessageof“A l l datawillbecleared.Areyousure?”will
appearinthescreen.
3. Usethecontrollerbuttonstoselect“Yes”,andcontinueholdingitfor
threesecondsorlonger.
Thescreenwillindicate“Working...”,andwhenformattingisfinished
theindic
ati
onwillchangeto“Completed.”
Ifyoudecidenottoformatthememorycard,usethecontrollerbuttons
toselectandconfirm“No”(orpressthemenubutton);youwillreturn
tothesystemsetting(SYSTEM)screen.
4. PresstheConfirmationbutton(orpressthemenubutton)toreturnto
thesystems
etting(SYSTEM)screen.
Updating the software (SoftwareUpdate)
YoucandownloadthelatestversionoftheMR‐2operatingsystemfile
fromtheKorgwebsite(www.korg.com).Fordetailsontheprocedure,
refertotheKorgwebsite.
Preparing for software update
UseaUSBcabletoconnecttheMR‐2toyourcomputer(referto“Using
theMR‐2withyourcomputer”onpage45
),andcopythedown
loaded
systemfiletotherootfolderofthememorycard.
Alternatively,youcanconnectamemorycard(thatyouplan to
useontheMR‐2)toyourcomputerdirectlyandcopythesystem
filetotherootfolderofthecard.
Push
Push
Push
3 seconds
or longer.