Korg XE20 - Playing the XE20 in Style Mode; Selecting a Grand Piano Sound; Sound Selection in Style Sets; Muting and Changing Sounds

Playing the XE20 (style mode)
13
Playing the XE20 (style mode)
Selecting a grand piano
y
Press the PIANO1/2 buon.
This will quickly select the grand piano sound. You can
switch between pianos 1 and 2 with each press of the buon.
Piano 1: German Piano
Piano 2: Italy Piano
Selecting sounds in the style set
What is a keyboard set?
The keyboard set is a group of sounds used in keyboard
performance.
Four parts are allocated to the keyboard set (the lower part
and upper parts 1–3), which include sounds like piano, strings,
synthesizer, drums and so on. These four parts together are
called a keyboard part.
Tip:
See the “Voice Name List” (PDF) for a list of the keyboard
sets and sounds.
What is a style set?
Keyboard sets that are most suitable for each style
(accompaniment) are available. These are called “style sets.”
1.
Press the STYLE SET buon.
A keyboard set appropriate for the style will be recalled.
Muting parts and changing sounds
On the keyboard part (upper 1–3 and lower) and on the
accompaniment part (drums, percussion, bass and other parts),
you can mute (turn o) individual parts, or change the part’s
sound.
Muting parts
y
Pressing the part buons will mute the respective part(s)
(the buon will go dark). Pressing the buons again will
cancel muting (the buon will light).
Changing sounds
1.
Press the part buon for the part you want to change while
holding down the [SHIFT] buon (the part buon will
blink).
and the sound name will blink on the display.
Note:
The sounds for “other parts” cannot be changed.
2.
Use the dial or the +/− buons to select a sound.
3.
Press the [SHIFT] buon to return to the previous mode.
Upper parts 1–3
Split point
Lower part
Le
ft side Right side
Keyboard
part
MutingUnmute
1
1