Korg XE20 - Balancing Keyboard and Accompaniment Volume

Auto-accompaniment (style mode)
20
Adjusting the volume of the keyboard and
accompaniment parts
You can adjust the volume balance between the keyboard and
accompaniment parts. This is useful for making a solo that you
play on the keyboard stand out over the accompaniment, or for
simply performing with good sound balance.
y
Adjusting the overall volume of the keyboard part (upper
1–3 and lower): Turn the dial while holding down the
STYLE SET buon.
y
Adjusting the overall volume of the accompaniment part
(drums, percussion, bass and other parts): Turn the dial
while holding down the STYLE/[MUSIC STYLE] buon.
y
Adjusting the volume of individual parts:
Turn the dial
while holding down the respective buons in the PART
MUTE/[SOUND SELECT] section.
Choosing a music style and playing
Instead of choosing a style, you can select a music style and
then play or record.
A music style is based on a style, but is optimized to include
a keyboard set that easily matches the mood of existing songs,
and contains other seings like tempo.
You can use music styles when playing music from your
favorite genre.
Note:
The music styles cannot be saved to a set list.
1.
Press the STYLE/[MUSIC STYLE] buon while holding
down the [SHIFT] buon.
The instrument will enter music style mode, and
will blink on the display.
2.
Use the dial or the +/– buons to select a music style.
Tip:
See the “Voice Name List” (PDF) for a list of music
styles available.
3.
Follow steps 3 and on in “Playing with a style you choose”
(page 18), or steps 2 and on in “Adding an intro or
seing a variation” (page 19).
Tip:
You can also mute the sound or adjust the volume
of the part, as shown in “Making changes to the auto-
accompaniment” (page 19).
Keyboard part
Accompaniment part
Accompaniment part volume
Keyboard part
volume
Volume of each part
1
1
2
2