Kortho Hot Quickcoder User manual
19
9 MAINTENANCE AND CLEANING
9.1 Maintenance
It is recommended to have the HQC system checked and/or reconditioned periodically.
The recommended frequency is once every two years depending on the degree of use of the HQC.
No special tools are needed for carrying out maintenance work.
9.2 Cleaning
The HQC can best be cleaned using a dry brush.
The control box can best be cleaned using a cleaner that will not damage the plastic.
! WARNINGS:
Whenever the HQC is cleaned it should first be completely disconnected from the mains power
removing the mains plug from the Control box (see figure 5)
Under no circumstances must the HQC be cleaned with water.
To Next Page
Loading...