Kortho Hot Quickcoder User manual
22
Checkpoint 5 TESTING PULSE/TIME
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on and activate the START button.
Activate the TEST button
Is the PULSE/TIME light illuminated?
Yes: Go to checkpoint 6
No: Perform steps 1 and 15
Perform step 9
Perform steps 11 and 12
Activate the ON button and the START button.
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on.
Activate the TEST button. Is PULSE/TIME now illuminated?
No: Contact the Korthofah service department
Yes: Go to checkpoint 6
Checkpoint 6 TESTING OPERATION OF TEXT HEAD HOLDER
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on.
Activate the TEST button
Does the text head holder of the HQC move?
Yes: Go to checkpoint 7
No: Perform steps 1 and 15.
Perform steps 8, 9 and 23.
Perform steps 10 and 18.
Perform steps 11 and 12.
Activate the ON button and the START button.
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on.
Activate the TEST button. Does the text head holder of the HQC now move?
No: Contact the Korthofah service department
Yes: Go to checkpoint 7
Checkpoint 7 TESTING THE SYSTEM ADJUSTMENT
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on.
Activate the TEST button
Adjust the system in accordance with Section 5
Does the text head holder of the HQC move?
Yes: Go to checkpoint 8
No: Perform steps 1 and 15.
Perform steps 19 and 20.
Perform step 21.
Perform steps 11 and 12.
Activate the ON button and the START button.
Set the temperature and wait until the TEMP light starts flashing *.
Check that the ON button lights are still on.
Activate the TEST button. Does the text head holder of the HQC now move?
No: Contact the Korthofah service department
Yes: Go to checkpoint 8
To Next Page
Loading...