Need help?Do you have a question about the Kospel KDE2 and is the answer not in the manual?
General| Installation Type | Wall-mounted |
|---|---|
| Minimum Water Pressure | 0.1 MPa |
| Protection Degree | IP25 |
| Heating element | Copper |
| Thermostat | Yes |
| Overheat protection | Yes |
| Type | Electric instantaneous water heater |
| Heating Time | N/A (Instantaneous) |
| Minimum Wire Gauge | 4 mm² |
| Water Connection | 1/2 inch |
| Protection class | Class I |
| Voltage | 400V 3~ |
To Next Page
