Need help?Do you have a question about the Kospel PPH2 and is the answer not in the manual?
General| Type | Instantaneous water heater |
|---|---|
| Maximum Water Pressure | 0.6 MPa |
| Protection Class | IP25 |
| Energy Efficiency Class | A |
| Water Connection | G 1/2 |
| Temperature Control | Electronic |
| Capacity | N/A (Instantaneous heater) |
Follow installation and operation instructions for unit longevity and reliability.
Ensure proper electrical connection, earthing, and protective devices for safe operation.
Install unit in a safe location away from explosion hazards and freezing temperatures.
Connect to cold water only; avoid use with empty pipes and take precautions with hot water.
Appliance not for persons with reduced capabilities without supervision; supervise children.
Step-by-step guide for physically mounting and connecting the water heater unit.
Instructions for setting the WC3/WT3 temperature limiter to the correct working position.
Steps to follow for venting the water heater and installation before and after use.
Explanation of automatic switching, flow rate impact, and knob positions for temperature control.
Description of the green and red indicators on the unit case for power and heating status.
Detailed steps for cleaning the unit's filter, including safety precautions and required tools.
Identifies common issues like no heating or lights off and their potential causes.
Provides detailed technical data for different models including power, voltage, and dimensions.
To Next Page
