Need help?Do you have a question about the Kostal PIKO 20 and is the answer not in the manual?
General| Model | PIKO 20 |
|---|---|
| Max. apparent AC power | 20 kVA |
| AC voltage range | 320 V - 480 V |
| Maximum DC Input Voltage | 1000 V |
| Nominal AC Output Power | 20 kW |
| Maximum AC Output Power | 20 kW |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Degree | IP65 |
| Nominal AC Frequency | 50/60 Hz |
| Communication | Ethernet |
Defines the intended use of the PIKO inverter for grid-connected photovoltaic systems.
Details the external components and connections of the PIKO inverter.
Details the internal components and connections of the PIKO inverter.
Explains advanced inverter functions like Shadow Management and External Module Control.
Explains how to connect the inverter to the electrical grid and related components.
Guides on connecting the PV strings to the inverter's DC inputs.
Step-by-step guide for the first-time setup and activation of the inverter.
Step-by-step instructions for powering on the inverter.
Procedures for safely turning off the inverter.
Detailed steps to completely de-energise the inverter for maintenance.
Lists event codes, their descriptions, and possible causes/measures.
Details methods for limiting PV power output to comply with regulations.
Describes how to use a ripple control receiver for power regulation.
Provides instructions for installing a ripple control receiver.
Details the wiring for self-consumption control using a load relay.
Guides on configuring self-consumption settings via the web server.
Instructions for updating the communication board software.
Instructions for updating the inverter's firmware.
Comprehensive table of technical specifications for PIKO inverters.
To Next Page
