Need help?Do you have a question about the Kostal PIKO MP plus and is the answer not in the manual?
General| Model | PIKO MP plus |
|---|---|
| Manufacturer | Kostal |
| Type | String Inverter |
| MPP Trackers | 2 |
| Maximum DC input voltage | 1000 V |
| Nominal AC voltage | 230 V |
| Nominal AC frequency | 50 Hz / 60 Hz |
| European efficiency | 96.5% |
| Operating temperature range | -25°C to +60°C |
| Protection degree | IP65 |
| Warranty | 5 years |
| MPPT voltage range | 200 V to 800 V |
| Cooling | Convection |
| Communication Interfaces | Ethernet, RS485, USB |
Company contact details, address, phone, fax, and website.
States KOSTAL's disclaimer regarding manual accuracy and usage.
Notes the effort to use gender-neutral language, though masculine form is used for readability.
Highlights that installation must be done by qualified electricians and emphasizes safety instructions.
Details the use of PIKO MP plus as a PV, battery, or hybrid inverter.
Provides the correct order for installing and commissioning the system to avoid errors.
Outlines the procedure for restarting the system after an error or manual shutdown.
Instructions for installing the Smart Energy Meter at the grid connection point.
Guides on how to install the PIKO MP plus inverter for battery integration.
Details connection via RJ45 connector and terminal strip for system components.
Configuring the PIKO MP plus inverter and setting DC input for battery.
Setting up Modbus, RS485 interfaces, and entering the activation code.
Adding devices, configuring parameters like output power and battery support.
Setting the inverter's DC switch and checking the battery status overview.
Enabling data transfer from PIKO MP plus and Smart Energy Meter to the KOSTAL Solar Portal.
Adding the inverter and Smart Energy Meter to the portal using article and serial numbers.
To Next Page
