18
3 Attached Tools
3.1 Attachment lists
Special wrench for spark plug
dual-purpose screw driver
3.2 Cargo box install instructions
1.
Place the machine on a flat road；
2.
Mount the rear side-panel and the left and right side-panel into the
base-panel of the cargo box, insert the pin roll and the cotter, then fasten
the hasp.
3.
The installing hole of the cargo box should align with the installing
hole of the big frame (as showed below), screw in the connecting rod of
the cargo box, and then insert the cotter.
Cautions
Fail in timely maintenance is the main cause for accident. In order to keep it in
good state, please check and maintain the machine in time
To Next Page