25
5 Troubleshooting
5.1 Walking apparatus
The machine cannot be started if the walking clutch rod is in Walking position
5.1.1 Check and see if the transmission gear shifting is at its appropriate position
(see 4.5)
5.1.2 V type belt is too loose, adjust V type belt
5.1.3 Brake locked, adjust brake to its best position
5.2 Brake apparatus is not good
5.2.1 Brake adjustment is not good, and adjust it to its best position（see4.6）.
5.2.2 Keep the brake day, if there is water inside Brake apparatus, hitting the brake
for few times.
5.2.3 Overload, reduce the load.
5.3 Track fall off
5.3.1 Check if the track is broke
5.3.2 Adjust tension pulley of the track（see 4.4）
5.4 Turning apparatus is not good
5.4.1 Check if the handle bar is good
5.4.2 Check if the handle cable is broken
5.4.3 Check if the turning separation arm and cable connection are good.
Caution
When this machine has problem, please stop using it and do some proper
treatment
To Next Page