Kramer FC-102Net

Kramer Electronics Ltd.
FC-101Net, FC-102Net – Upgrading the Firmware
11
Upgrading the Firmware
Use the Kramer K-UPLOAD software to upgrade the firmware via the RS-232 3-pin terminal
block.
The latest version of K-UPLOAD and installation instructions can be downloaded from our
website at: www.kramerav.com/support/product_downloads.asp.
Note that in order to use the micro USB port, you need to install the Kramer USB driver,
available at: www.kramerav.com/support/product_downloads.asp.
To upgrade Dante firmware, refer to www.audinate.com/latest-firmware-update-manager.