Kramer VP-439

30
VP-439 - Technical Specifications
7.1 Default Communication Parameters
RS-232
Baud Rate:
9,600
Data Bits:
8
Stop Bits:
1
Parity:
None
Ethernet
To reset the IP settings to the factory reset values go to : Menu-> Factory-> RESET->Change
the option to YES and press Enter
IP Address:
192.168.1.39
Subnet mask:
255.255.255.0
Default gateway:
192.168.0.254
Default UDP Port #:
50000
Maximum UDP Ports:
1
Full Factory Reset
OSD
Go to : Menu-> Factory-> RESET->Change the option to YES and
press Enter
RS-232/Ethernet (UDP) Command Protocol
Command Format:
ASCII protocol 3000
Example (Route the video input to the output):
#ROUTE 12,1,2<cr>