Kramer VS-44H2 Quick Start Guide

VS-44H2 Quick Start
P/N:
2900- 30129 7 QS
Rev:
1
Scan for full manual
VS-44H2 Quick Start Guide
This guide helps you install and use your VS-44H2 for the first time.
Go to www.kramerav.com/downloads/VS-44H2 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VS-44H2 4K 4x4 Matrix Switcher
4 Rubber feet
1 Quick start guide
1 Set of rack ears
1 Power cord
Step 2: Get to know your VS-44H2
#
Feature
Function
1
IN Select Buttons (1 to 4)
Press to select the input to switch after selecting an output (also used for storing
machine setups).
2
OUT Select Buttons (1 to 4)
Press to select an output to switch followed by an input.
3
MUTE/PATTERN Button
Press to view the current pattern status and select the output/s to which a pattern is
routed.
Press to mute audio and video on a selected output.
4
ALL Button
Press followed by an input button to connect the selected input to all outputs.
For example, press ALL and then Input button # 2 to connect input # 2 to all the
outputs.
5
STO Button
Press STO followed by an IN or OUT (1 to 4) button to store the current switching
configuration to the location corresponding to that INPUT number.
6
RCL Button
Press RCL followed by the corresponding IN or OUT (1 to 4) button to recall the
preset switching configuration saved in that location.
7
LOCK Button
Press and hold to toggle between locking and releasing the front panel buttons.
8
EDID Button
Press to enter the EDID mode.
9
OUTPUT/INPUT 7-segment LED
Display
Displays the input currently switched to the output which is marked above each input.

Kramer VS-44H2 Specifications

General

Brand	Kramer
Model	VS-44H2
Category	Matrix Switcher
Language	English