Need help?Do you have a question about the Kramer VS-88H and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | VS-88H |
| Power Supply | 100-240V AC, 50/60Hz |
| Control Interfaces | RS-232, Ethernet, IR |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Inputs | 8x HDMI |
| Outputs | 8x HDMI |
Guidance on using high-quality cables and proper placement for optimal performance.
Essential safety precautions for operating the VS-88H unit.
Information on the proper disposal and recycling of Kramer Electronics products.
A detailed definition and overview of the VS-88H HDMI Matrix Switcher.
Instructions on how to use the Kramer RC-IR3 IR transmitter for device control.
Details on establishing a serial connection to the VS-88H using an RS-232 port.
Guide for connecting and configuring the VS-88H via an Ethernet network connection.
Procedure for routing input signals to specific or all output ports on the matrix switcher.
Steps to disconnect individual or all outputs from their current inputs.
How to save and load up to 16 preset configurations for quick setup recall.
Methods for acquiring Extended Display Identification Data (EDID) for connected displays.
Procedure to lock or unlock the front panel buttons to prevent unauthorized changes.
Instructions for restoring the Ethernet settings to their factory default configurations.
How to manage and configure the VS-88H unit using its Ethernet port.
To Next Page
