Kramer VS-88HDxl User Manual

Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
VS-88HDxl
8x8 3G SD/HD-SDI Matrix Switcher

Kramer VS-88HDxl Specifications

General

Brand	Kramer
Model	VS-88HDxl
Category	Matrix Switcher
Language	English

Summary

Introduction

Quick Start

A summarized guide for basic setup and operation of the VS-88HDxl.

Installing the VS-88HDxl in a Rack

Connecting the VS-88HDxl

Connecting the VS-88HDxl in the Single Link Mode

Guide for connecting the VS-88HDxl for single link SDI video signals.

Connecting the VS-88HDxl in the Dual Link Mode

Guide for connecting the VS-88HDxl for dual link SDI video signals.

Setting the Working Mode

Configuring the VS-88HDxl to operate in single or dual link mode.

Connecting the RS-232 Port

Details on establishing a serial connection using the RS-232 port.

Setting the DIP-Switches

Connecting a PC or Controller to the RS-485 Port

Connecting the Ethernet Port

Steps for connecting the VS-88HDxl to a network via Ethernet.

Connecting the ETHERNET Port Directly to a PC (Crossover Cable)

Configuring the Ethernet Port

Controlling via the Ethernet Port

Operating the VS-88HDxl

Operating the VS-88HDxl from the Front Panel

Detailed instructions for controlling the unit using its front panel buttons.

Using the AT ONCE and CONFIRM Modes

Storing an Input/Output Configuration

Recalling an Input/Output Configuration

Switching Protocols

Using Serial Commands

Controlling the VS-88HDxl using serial commands via PC or controller.

Technical Specifications

Using the P3K Wizard

Changing the Device Parameters

Modifying device settings using the P3K Wizard software.

Updating the VS-88HDxl Firmware

Procedure for upgrading the VS-88HDxl's internal firmware.

Kramer Protocol 3000

Kramer Protocol 3000 Syntax

Understanding the structure and rules of Kramer Protocol 3000 commands.

Kramer Protocol 3000 Commands

List and explanation of available commands for Kramer Protocol 3000.