Need help?Do you have a question about the Kramer VS-62H and is the answer not in the manual?
Guidelines for ensuring optimal signal quality and device operation.
Essential safety precautions for operating and installing the device.
How to connect the VS-62H to a network via Ethernet (direct or hub/switch).
Step-by-step guide to routing inputs to the desired outputs.
Explanation of DIP-switch functions and how they dictate device behavior.
Steps to reset the VS-62H to its original factory default settings.
Methods for upgrading the device firmware via USB, RS-232, or Ethernet.
Manages input/output routing and HDCP. Includes switching, remote transmitters, and test patterns.
General| Category | Matrix Switcher |
|---|---|
| Model | VS-62H |
| Video Inputs | 6 |
| Video Outputs | 2 |
| Max Resolution | 4K@60Hz (4:4:4) |
| HDCP Compliance | HDCP 2.2 |
| Max. Data Rate | 18 Gbps |
| Size | 1U |
| Control | RS-232, Ethernet |
| HDMI Support | HDMI 2.0 |
| Video Resolutions | Up to 4K |
| EDID Management | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
To Next Page
