Kramer VS-62H - Figure 15: the Remote Device Control Window

28
VS-62H - Operating the VS-62H Remotely via the Web Pages
10.2.2 Controlling a Remote Transmitter
Compatible remote transmitters, (for example, the SID-X3N) that are connected to
the VS-62H can be controlled using the Web pages, (see Section 10.2, Figure 14).
Figure 15: The Remote Device Control Window
The VS-62H allows you to program the general purpose buttons on remote
modules. The table shows the functionality defined for each button. The options
are:
 HDMI, DP, DVI, PC—selects one of the inputs
 Echo—allows a connected controller to be programmed to perform a variety
of tasked triggered by the user buttons, such as, room control, (lights,
screen, and so on)
 Out 1—step-in current input to output 1
 Out 2—step-in current input to output 2
Note: These settings are per input and remain valid even if the remote SID-X3N is
exchanged for another SID-X3N.
Up to three of the Echo, Out 1 and Out 2 buttons can be active at the same time.