Kramer VS-62H

VS-62H - Operating the VS-62H Remotely via the Web Pages
27
Figure 14: The Input Buttons
#
Item
Description
1
Input Button Number
Identifies the Input number
2
Input Type and Signal
Indicator
Indicates the type of input and whether there is a
signal present on the Input
3
HDCP Selection Button
Click the button to turn HDCP support for the Input
on and off
4
HDCP Content Indicator
Indicates whether or not the Input signal is HDCP
protected
5
Remote Device Control
Button
Click the button to display the control window for the
remote device connected to this Input (see Section
10.2.2)
10.2.1 Switching an Input to an Output
To switch an Input to an Output, (for example, Input 2 to Output 2):
1. Click on Output button 2.
The button changes color to purple and the Output is selected.
2. Click on Input button 2.
The button changes color to purple and the output is switched.