Need help?Do you have a question about the Kramer VS-44DT and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Video Inputs | 4 |
| Video Outputs | 4 |
| Max Resolution | 4K@60Hz (4:4:4) |
| Max. Data Rate | 18 Gbps |
| HDBaseT Certified | Yes |
| Audio Embedding | Yes |
| Power Consumption | 20W |
| HDCP Compliance | 2.2 |
| Range | Up to 100m |
| Audio | Embedded |
| Control | RS-232, Ethernet |
| Size | 1U |
| Power Supply | 100-240V AC, 50/60Hz |
| Signal Type | HDMI |
| Connector Type | HDMI |
List of items included in the VS-44DT package.
Overview of the VS-44DT front panel features and functions.
Instructions for installing the VS-44DT unit into a rack.
Steps for connecting AV sources and displays to the VS-44DT.
Procedure for connecting the VS-44DT to a power source.
Guide to setting device parameters using the front panel menu.
Using the front panel menu and buttons for operation.
Detailed technical specifications of the VS-44DT matrix switcher.
Introduction to Kramer Electronics and the VS-44DT switcher.
Tips for optimal performance and signal quality.
Important safety precautions for using the device.
Information on Kramer's recommended cables for optimal performance.
Information on environmentally responsible product disposal.
Comprehensive list of the VS-44DT's capabilities and functions.
Explanation of HDBaseT connectivity technology.
Detailed definition of the VS-44DT product.
Important safety and installation guidelines for rack mounting.
Visual guide showing typical input/output connections for the VS-44DT.
Instructions for connecting the VS-44DT via RS-232 to a serial controller.
Connecting the VS-44DT via RS-232 to data sources/acceptors.
Procedure for direct Ethernet connection to a PC.
Pinout and wiring details for RJ-45 connectors.
Connecting the VS-44DT to a network hub or switch.
How to switch inputs to outputs on the device front panel.
Saving and recalling device configurations using presets.
Procedure to acquire and assign EDID data.
How to disconnect outputs from the VS-44DT.
Steps to reset the device to factory defaults.
How to lock/unlock front panel buttons.
Navigating the device's menu system for configuration.
Configuring audio settings and volume levels.
Configuring RS-232 data routing between ports.
Enabling or disabling automatic input switching.
Configuring network (IP, DHCP) parameters.
Displaying TCP/IP communication parameters.
Displaying the current firmware version.
Resetting device to default factory parameters.
Updating the device firmware.
Configuring DHCP settings for network connection.
Setting the device's IP network address manually.
Resetting device to factory default parameters and rebooting.
List of compatible operating systems and web browsers.
Description of the web interface switching page for input selection.
Managing device information and settings via the web interface.
Procedure for updating device firmware through the web interface.
Configuring web page authentication and password settings.
Managing EDID data (copying, reading) via the web interface.
Routing RS-232 data to outputs through the web interface.
Adjusting audio output volume and mute status via the web interface.
Configuring switching timeouts for signal loss or cable unplug events.
Displays device firmware revision and company details.
Procedure to upgrade the main microcontroller firmware.
Procedure to upgrade the I/O microcontroller firmware.
Default RS-232 and Ethernet IP parameters for the VS-44DT.
Explanation of Protocol 3000 command structure and syntax.
Syntax and delimiters used in Kramer Protocol 3000 commands.
Categorized list of available Protocol 3000 commands.
Detailed reference for system-related Protocol 3000 commands.
Command to retrieve the device's build date.
Command to reset the device to factory default configuration.
Command to get command list or help for specific commands.
Command to retrieve the device model information.
Command to get the device's protocol version.
Command to reset the device.
Command to retrieve the firmware version number.
Command to set auto switching timeout parameters.
Command to get output HPD status.
Command to get input signal status.
Command to recall saved preset configurations.
Command to store current configurations into presets.
Command to lock or unlock front panel buttons.
Command to set the device's machine number.
Overview of commands for video control.
Command to set or get video mute status on outputs.
Overview of commands for managing EDID data.
Command to copy EDID data from output to input EEPROM.
Overview of commands for controlling audio mute and volume.
Command to set or get audio mute status.
Command to set or get simple audio volume.
Overview of commands for switching inputs/outputs and routing.
Command to set or get video switch state.
Command to set or get layer routing.
Overview of commands for network communication settings.
Command to set or get Ethernet port protocol.
Command to set or get DHCP mode.
Command to set or get the gateway IP address.
Command to set or get the IP address.
Command to get the MAC address.
Command to set the subnet mask.
To Next Page
