Need help?Do you have a question about the Kramer VS-42H2 and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | VS-42H2 |
| Video Inputs | 4 |
| Video Outputs | 2 |
| Supported Resolutions | Up to 4K@60Hz (4:4:4) |
| HDMI Version | 2.0 |
| HDCP Support | 2.2 |
| Max. Data Rate | 18 Gbps |
| Control | RS-232, Ethernet, IR |
Unpacking, manual review, and firmware update checks.
Tips for optimal operation, cable quality, and interference avoidance.
Important cautions and warnings for safe equipment usage and environment.
Highlights high-performance switching, 4K resolution, HDR, and signal technology.
Features like EDID management, convenient control, and cost-effective maintenance.
Focuses on flexible content protection and selectable HDCP per input.
Methods for controlling the device: front panel, RS-232, IR, or Ethernet web pages.
Details on operating the unit with the IR remote control, including external receiver setup.
Explanation of front panel buttons, LEDs, and their functions.
Detailed explanation of rear panel connectors and their functions.
Specifies operating temperature, storage, and humidity ranges for the device.
Instructions for rack mounting using an adapter or surface mounting.
Step-by-step instructions for connecting HDMI sources, displays, and power.
Guide for direct Ethernet connection using a crossover cable and PC configuration.
Instructions for connecting the device via a network hub or switch.
Wiring details for external contact-closure input selection switches.
Instructions for serial communication setup using the RS-232 port.
How to enable or disable front panel button functionality.
Process for capturing and copying EDID data from outputs to inputs.
How to mute or unmute audio and video signals for outputs.
Steps for selecting and routing input signals to specific outputs.
Explanation of DIP-switch functions for device behavior and configuration.
Procedure to restore the device to its original factory settings.
Methods and steps for updating the device firmware via USB, RS-232, or Ethernet.
Steps to access and log in to the device's web interface.
Using the web interface to manage signal routing between inputs and outputs.
Controlling audio/video mute status for outputs via the web interface.
Securing the device's controls through the web interface.
Managing EDID data, including copying from outputs, inputs, or files.
Loading EDID data from an external file into the device.
Adjusting communication parameters like IP address and baud rate.
Resetting the device to factory defaults using the web interface.
Updating the device firmware using the web interface.
Accessing company details and firmware version information via the web interface.
Overview of inputs, outputs, ports, video bandwidth, and enclosure details.
Default RS-232 and Ethernet settings including IP address and baud rate.
Default EDID settings, supported formats, and timing characteristics.
List of supported video resolutions, refresh rates, and timing details.
Details on supported audio formats and speaker allocation data.
Explanation of Kramer Protocol 3000 command structure, syntax, and feedback format.
Commands for managing baud rate settings and retrieving device build date.
Commands for EDID data transfer and HDCP mode configuration.
Commands for accessing help, locking/unlocking controls, and retrieving the device model.
Commands for network configuration (IP, MAC) and layer routing.
Commands for setting IP addresses, MAC addresses, subnet masks, and passwords.
Commands for checking signal status, firmware version, and video mute.
Structure of error messages returned by the device for general or specific commands.
Detailed list of error names, their corresponding codes, and descriptions.
To Next Page
