Kramer VS-42H2

Kramer Electronics Ltd.
VS-42H2 – Using Embedded Web Pages
19
A success message is displayed and the EDID data are copied to the selected Input(s).
5. Click OK.
The message disappears.
Copying EDID Data from an EDID Data File
To copy EDID data to an input from an EDID data file:
1. Click EDID on the Navigation List.
The EDID page appears.
2. Click the BROWSE button.
The Windows Browser opens.
3. Select the required file and click Open.
The EDID summary information reflects the selection.
4. Click one or more destination Inputs.
All selected Input buttons change color and the EDID summary information reflects the
Input selection(s).
You can check or uncheck the Inputs checkbox to select or deselect all 4 inputs.
5. Click the Copy button.
The “EDID was copied” success message is displayed and the EDID data are copied to
the selected Input(s).
6. Click OK.